LayersFactory
Report model
1 / 3
Spig Wing Jig - Flinging Arrows Mod V0.2 — image 1
1 / 3

Spig Wing Jig - Flinging Arrows Mod V0.2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ThaatGuy

ThaatGuy

@ThaatGuy_2255563

Jig used to align Spin Wing type vanes on arrows.

Rating
0 / 5
Likes
11
Downloads
191
Makes
0
Views
644
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Outdoor Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (9)Makes & comments (Makes: 0) (Comments: 2)Remixes (0)Collections (21)Related

Thanks to Ludodg for the initial design. 

V0.2  1/27/2026

Initial public beta release.
Jig has been tested for printability.
Successfully used to fletch 1 dozen of the following arrows with spider vanes
      Easton x10
      Pandarus CA320 Elite
      Avalon Classics 4.2mm 
      Victory Vaps
Known Issues
      *Nock holder hexagon fits with tuned printers. For printers with looser tolerances scale the nock holder by 1%.

  • TODO

    • BOM - Links, printed parts.

    • Print Settings

    • Assembly Instructions

    • Longer Holder for Indoor Vanes

    • Jet6 clamps

    • Cleanup Fusion 360 File

    • Options for Printed Beams

    • Description

BOM

  • 5x M5x10 BHCS

  • 2x M5 Roll In T Nut

  • 2x M5x12 Thumbscrews

  • 1x 2020 V-Slot 300mm (Centers tapped for M5)

  • 1x 2020 V-Slot 100mm (Centers tapped for M5)

  • 1x 10mm elastic band 700mm long (~28 inches)

  • 1x Cord lock for elastic band (Can also just tie a knot) 

Print Settings

PLA/PETG can be printed without changes needed 

ABS parts are not scaled to account for shrinkage. You will need to scale them up. Recommended (100.45)

Used standard Voron settings for test parts https://docs.vorondesign.com/sourcing.html#print-settings

Tags

archeryarcheryequipmentarcherytools