TT-02 Rear Shock Relocation Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improve the rear suspension feel of your Tamiya TT-02 drift car.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The rear suspension of my TT-02 felt far too stiff, even with the Soft springs included with the Tamiya CVAs. These brackets bring the mounting point 7mm inwards.
Notes:
Designed to be used with Tamiya CVAs (TAM54753)
Need 4x 3x12 machine screws (2 for each side) to mount brackets to arms
Left and Right brackets are different and should be mounted as pictured, with the extended screw hole facing forwards and the hole in the high position.
No durability issues when printed in PETG @100%
Orient the print with the flat side down (STL is NOT oriented correctly, see 3D screenshot for reference)
Tapping the shock mounting hole helps with screwing in the ball stud. I did not do this as I am lazy.