1 / 1
10" Rack Mount for Greathtek / Pway / TeeTek 2 PC KVM Switch — zdjęcie 1

10" Rack Mount for Greathtek / Pway / TeeTek 2 PC KVM Switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount comes with a retaining lip at the front so it cannot slide out when pulling on a cable ;)

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
GNU General Public License v3.0

Simple model that will very snugly hold a Greathtek KVM switch for two PCs. Note that this exact device is sold under several different brand names, too, such as TeeTek or PWay.

It will be held in the front by a very unobtrusive 0.4 x 1,3 mm lip that will prevent the switch from being pulled out via the front, e.g. when you pull a cable out. Similarly, it will be held in place by another retaining lip in the back so it does not get pushed in, either by pressing the button or plugging in a cable. 

Print with the following settings:

Layer height: 0.2; adaptive layer height is definitely worth a shot
Walls: 5
Top / bottom shell: 5 layers
Infill: 20-40 % - Rectilinear, Honeycomb or Gyroid

The model is made to be printed laying on its face plate. In that orientation it does not require any supports. Other orientations are possible, but will require a LOT of support material. 

Tagi