10" Rack Mount for Greathtek / Pway / TeeTek 2 PC KVM Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount comes with a retaining lip at the front so it cannot slide out when pulling on a cable ;)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- GNU General Public License v3.0
Simple model that will very snugly hold a Greathtek KVM switch for two PCs. Note that this exact device is sold under several different brand names, too, such as TeeTek or PWay.
It will be held in the front by a very unobtrusive 0.4 x 1,3 mm lip that will prevent the switch from being pulled out via the front, e.g. when you pull a cable out. Similarly, it will be held in place by another retaining lip in the back so it does not get pushed in, either by pressing the button or plugging in a cable.
Print with the following settings:
Layer height: 0.2; adaptive layer height is definitely worth a shot
Walls: 5
Top / bottom shell: 5 layers
Infill: 20-40 % - Rectilinear, Honeycomb or Gyroid
The model is made to be printed laying on its face plate. In that orientation it does not require any supports. Other orientations are possible, but will require a LOT of support material.