Breadboard Mount for 1.3" OLED Display with EC11 encoder ESP Arduino
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder for a 1.3" OLED display with EC11 encoder, fixed at 45° on a breadboard for clear viewing and prototyping.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
If you like what I do here, come visit my (German) Discord or my Facebook group.
Discord: MX-creations
Facebook: 3D printed Grow Tools & Accesories - free .stl
This set is designed for breadboard-based prototyping with Arduino and ESP32 systems using a 1.3" OLED display (SH1106 / SSD1306, I²C) with EC11 encoder.
The main holder mounts the display directly onto a standard breadboard at a fixed 45-degree viewing angle, improving readability during development.
It can be simply plugged onto the breadboard for quick setup or optionally secured with an M3 × 6 mm screw for increased stability.
In addition to the display holder, the set includes a clip that mounts onto the mainboard. This clip compensates for the height difference between the controller board and the display holder and also provides basic cable management to keep wiring organized during prototyping.
The design is intended for electronics testing, UI development, and embedded system prototyping without additional mounting hardware.
Hardware required:
4(5)× M3 × 6 mm screw