Volvo Front VVT Cam Seal Drift - From Reference (9995718)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Measured 9995718 with calipers, this is the result. Should be within a few tenths of a millimeter.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is!
On eBay here if you can't print yourself.
I suggest printing with a high number of walls (6 or more? Go nuts, I did 10.) and high infill, a large number of walls will make a solid section around the center bolt hole which is the part that'll experience the most stress. May need to scale the print 1-2%, I'm reading 23.8mm on the center hole on my printed part vs 24mm on the actual part.
Random seams may also help to make the interior fit better without a seam misaligning it on the cam end.
Pictures are of the tool I measured and sketched up on the left, and the printed one on the right.