Volvo Front VVT Cam Seal Drift - From Reference (9995718)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Measured 9995718 with calipers, this is the result. Should be within a few tenths of a millimeter.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 75
- Makes
- 0
- Views
- 257
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is!
On eBay here if you can't print yourself.
I suggest printing with a high number of walls (6 or more? Go nuts, I did 10.) and high infill, a large number of walls will make a solid section around the center bolt hole which is the part that'll experience the most stress. May need to scale the print 1-2%, I'm reading 23.8mm on the center hole on my printed part vs 24mm on the actual part.
Random seams may also help to make the interior fit better without a seam misaligning it on the cam end.
Pictures are of the tool I measured and sketched up on the left, and the printed one on the right.