MMU3 for CORE One L parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original Prusa MMU3 parts for installing on Core One L.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 449
- Wydruki
- 3
- Wyświetlenia
- 2794
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
Description:
All parts required to convert your existing Original Prusa MMU3 (for MK4S or CORE One / CORE One+) into the Original Prusa MMU3 for CORE One L.
This set includes everything needed to upgrade your current MMU3 unit to be compatible with the CORE One L.
There are two available conversion options:
Lite version - without enclosure
Enclosed version - with top cover
Please note that some components are not suitable for 3D printing. STEP or DXF files are provided for these parts to enable alternative manufacturing methods.
Before you begin printing, carefully read the included instructions. Additional hardware components are required for the conversion and must be sourced separately.
Print instructions:
Download the latest PrusaSlicer and use the following settings*:
Print settings: 0.20mm BALANCED
Filament: PETG (tested on Prusament)
15% Grid infill
* Note that print settings are recommended, but you can experiment with your own.
The prints were tested on the Prusa CORE One L.
Required fasteners and parts:
Buffer | |
M3x8 screw | 12 pcs |
M3x30 screw | 22 pcs |
Magnet 20x6x2 | 18 pcs |
M3nS nut | 22 pcs |
Buffer wheels - can be used from your previous mod | |
Bearing 693.2rs | 5 pcs |
Shaft 2,9x8,5 | 5 pcs |
M3n nut | 15 pcs |
M3x6 screw | 25 pcs |
Lite version | |
M3x10rT screw | 4 pcs |
Enclosed version | |
M3x10rT screw | 12 pcs |
O-ring 2,8x1,2 | 2 pcs |
Nylon rivet | 4 pcs |
PTFE tubes | |
PTFE 4x2,5x710 | 5 pcs |
PTFE 4x2,5x940 | 5 pcs |
PTFE 4x2,2x460 | 1 pc |
Nextruder modification - can be used from your previous mod | |
Nextruder nozzle (0.4 mm normal flow) | 1 pc |
Magnet 3x1mm | 1 pc |
M3nN nut | 2 pcs |
M3x22 screw | 2 pcs |
M3x35 | 2 pcs |
O-ring 24,5x1,5 | 1 pc |
Before using the MMU3, set the correct PTFE tube length (460 mm) in the printer menu under Settings → Hardware → MMU → Front PTFE Length. This setting is available in firmware version 6.3.3 or newer.
If you do not own an MMU3 unit, we recommend ordering the CORE One+ Lite version from our e-shop.
Please refer to this article for assembly instructions.
Required tools:
T10 Allen key
2,5mm Allen key