1 / 6
CR-6 SE Filament Sensor Adaptor for Dual Gear Extruder — zdjęcie 1
1 / 6

CR-6 SE Filament Sensor Adaptor for Dual Gear Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Most filament sensor adapters require two new longer screws. This one re-uses two screws from the OEM extruder instead

Ocena
4,5 / 5
Polubienia
19
Pobrania
159
Wydruki
2
Wyświetlenia
715
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Most of the filament sensor adapters for the dual gear extruder required adding two longer screws.

I designed this one to re-use two 3mm flathead screws from the original extruder, as well as the two screws already used for the filament sensor. I also wanted it to guide the filament directly into the extruder.

After printing, I reamed out the guide tube with a 5/64 drill bit to smooth out the walls and avoid any unnecessary friction.

Update: 10-08-2021

Added v2, a version with a raised collar around the mounting holes for better screw grip. Also widened the guide tube slightly so you should not need to ream it out.

Print Settings

Printer Brand:

Creality

Printer: 

CR-6 SE

Rafts:

No

Supports: 

No

Resolution:

.2 mm

Infill: 

20

Filament: Inland PLA+ Neon Green

 

 

 

Category: 3D Printer Parts

Tagi