1 / 6
CR-6 SE Filament Sensor Adaptor for Dual Gear Extruder — image 1
1 / 6

CR-6 SE Filament Sensor Adaptor for Dual Gear Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Most filament sensor adapters require two new longer screws. This one re-uses two screws from the OEM extruder instead

Rating
4.5 / 5
Likes
19
Downloads
159
Makes
2
Views
715
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Most of the filament sensor adapters for the dual gear extruder required adding two longer screws.

I designed this one to re-use two 3mm flathead screws from the original extruder, as well as the two screws already used for the filament sensor. I also wanted it to guide the filament directly into the extruder.

After printing, I reamed out the guide tube with a 5/64 drill bit to smooth out the walls and avoid any unnecessary friction.

Update: 10-08-2021

Added v2, a version with a raised collar around the mounting holes for better screw grip. Also widened the guide tube slightly so you should not need to ream it out.

Print Settings

Printer Brand:

Creality

Printer: 

CR-6 SE

Rafts:

No

Supports: 

No

Resolution:

.2 mm

Infill: 

20

Filament: Inland PLA+ Neon Green

 

 

 

Category: 3D Printer Parts

Tags