Wireless Microphone Clip - 35mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to hold a Shure PGXD2 wireless microphone.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to hold a Shure PGXD2 wireless microphone (35mm). I've included the 30mm drawing too and the STP for the original.
Additional hardware required: The microphone stand threads are 5/8-27 UNS. You can buy an adapter to fit a 1/4-20 thread to mount to the bottom of these. The hole in the bottom is 0.350 to fit a 1/4-20 heat-set insert.
https://www.mcmaster.com/93365A162/
Hardware will be required for the pivot point. I've designed 4 different bases for the various options: Base 1 & 2 are for barrel bolts in both 1/4 and 5/16 sizes. Base 3 is for a 5/16 screw and a Nylock nut. Base 4 is for a 5/16 square head bolt with a wingnut.
PETG is probably the best option 0.4mm nozzle with 0.16mm layer height, 3-4 walls & 25-50% infill minimums.
PLA will creep over time and it best printed nearly solid.