Wireless Microphone Clip - 35mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold a Shure PGXD2 wireless microphone.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to hold a Shure PGXD2 wireless microphone (35mm). I've included the 30mm drawing too and the STP for the original.
Additional hardware required: The microphone stand threads are 5/8-27 UNS. You can buy an adapter to fit a 1/4-20 thread to mount to the bottom of these. The hole in the bottom is 0.350 to fit a 1/4-20 heat-set insert.
https://www.mcmaster.com/93365A162/
Hardware will be required for the pivot point. I've designed 4 different bases for the various options: Base 1 & 2 are for barrel bolts in both 1/4 and 5/16 sizes. Base 3 is for a 5/16 screw and a Nylock nut. Base 4 is for a 5/16 square head bolt with a wingnut.
PETG is probably the best option 0.4mm nozzle with 0.16mm layer height, 3-4 walls & 25-50% infill minimums.
PLA will creep over time and it best printed nearly solid.