Super Nintendo SNES PAL Cartridge Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice, round stand for your PAL SNES carts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple stand for PAL SNES games. Prints in about half an hour. If you have a multicolour printer, you can use the provided 3MF, which is pre-coloured with grey and red filament. No supports are needed, you can pretty much print this at default settings.
Note: This was inspired by this stand for NTSC SNES games by MisterSandman. After printing that, I found it didn't fit PAL cartridges very well, so I decided to design my own. This is not a remix, I didn't use any of their work in this model—I took my own measurements and vectorised the SNES logo myself, using Inkscape.