Scx10 ii Servo and Servo Winch Mount for Forward Trans Flip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis. Steering servo in stock…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 888
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I designed this piece to work with my trans and motor flip mounts for a 10.2 kit chassis.
Steering servo in stock position and a servo winch flat and as low as can fit up front on the chassis. You may have to space your servo up depending on the horn you are using. I'm not sure if this will fit every bumper but it did fit with a couple I had around to try.
Check out my motor and trans flip here! https://www.thingiverse.com/thing:4402555
I'm using this printed winch spool https://www.thingiverse.com/thing:3389900
Category: R/C Vehicles
