Tripod / Monopod Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These replace the foot on any pod with a 3/8" 16 thread per inch socket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
This foot will replace a foot on many standard tripods/monopods with a 3/8" x 16 thread per inch socket. This connection is standard on many pods - check yours to confirm a match. I used a hex-head 3/8" 16 thread per inch bolt 3/4" long in stainless steel. I printed the foot flat side down with supports from the building plate. The material was Siraya 85A black TPU - I believe most TPU filaments should work well. I suggest 40% infill and 4 perimeters. TPU sticks tightly to PEI plates so make sure to use a glue stick or other release agent. Epoxy the bolt into the foot. A Fusion 3D file is included if you want to modify this design.