Tripod / Monopod Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These replace the foot on any pod with a 3/8" 16 thread per inch socket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
This foot will replace a foot on many standard tripods/monopods with a 3/8" x 16 thread per inch socket. This connection is standard on many pods - check yours to confirm a match. I used a hex-head 3/8" 16 thread per inch bolt 3/4" long in stainless steel. I printed the foot flat side down with supports from the building plate. The material was Siraya 85A black TPU - I believe most TPU filaments should work well. I suggest 40% infill and 4 perimeters. TPU sticks tightly to PEI plates so make sure to use a glue stick or other release agent. Epoxy the bolt into the foot. A Fusion 3D file is included if you want to modify this design.