Vesa 70x70 monitor holder for custom wooden stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height and pivot adjustable.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A Vesa monitor holder.
I got a Samsung monitor which cannot be adjusted in height, but it has a connection for a Vesa 70x70 holder. Hence I decided to build a custom wooden holder from cherry tree. It has a base plate and an upright square wooden rod of a little bit less than 44mm width. There are two clamps provided for different thickness of the rod:
one for 27mm-35mm (depending on the length of the screws used for clamping)
one for 22mm-28mm
Hardware required:
4x M4x16mm for the Vesa mount (length depends on the monitor)
1x M8x100 or longer as the main pivot axis
2x M8x40 or longer for the pivot adjustment
2x M8x40 or M8x50 for the clamp, depending on the thickness of the wooden rod.
4x M8 square nut
Printed in ASA - less strong material is also totally fine.
Do not forget to like, if You like!