1 / 4
Vesa 70x70 monitor holder for custom wooden stand — image 1
1 / 4

Vesa 70x70 monitor holder for custom wooden stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Height and pivot adjustable.

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
67
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

A Vesa monitor holder.

I got a Samsung monitor which cannot be adjusted in height, but it has a connection for a Vesa 70x70 holder. Hence I decided to build a custom wooden holder from cherry tree. It has a base plate and an upright square wooden rod of a little bit less than 44mm width. There are two clamps provided for different thickness of the rod: 

  • one for 27mm-35mm (depending on the length of the screws used for clamping)

  • one for 22mm-28mm 

Hardware required:

  • 4x M4x16mm for the Vesa mount (length depends on the monitor) 

  • 1x M8x100 or longer as the main pivot axis

  • 2x M8x40 or longer for the pivot adjustment

  • 2x M8x40 or M8x50 for the clamp, depending on the thickness of the wooden rod.

  • 4x M8 square nut 

Printed in ASA - less strong material is also totally fine. 

Do not forget to like, if You like!

Tags