DJI Mavic Pro - 3D Laser Scanned
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
By popular request, here is the Pro model. 3D Laser scanned with a Creaform Handyscan 700 (0.3 mm res) -Missing…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 1119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
By popular request, here is the Pro model.
3D Laser scanned with a Creaform Handyscan 700 (0.3 mm res)
-Missing Motors/Props/Camera.
-As you can see on the bottom, the grills were hard to scan and turned into a mess.
-I tried to keep the senors visible, but filled in the rest.
-The Camera has been removed, and is now open to maybe mount your own camera.
Screw holes, joints and cables were filled
Motor mount angles might be slightly off due to mesh editing.
A section on the back leg is missing due to a crash.
Category: R/C Vehicles