Configurable Mounting Beams for Modular Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to create articulated mounting solutions using Modular Mounting System components.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
These are simple but effective beams for mounting any Modular Mounting System, GoPro, or other compatible components.
This pack includes a number of common sizes, some with angled or straight connectors.
I've also included an axis changer, an M-M connector, and an F-F connector.
or you can use the OnShape document to create and configure any size you need. The configuration panel includes options for length as well as angled or straight tabs.
Configuration Options
Length - Sets the functional length of the beam (the length between tab centers)
M-Tab Direction
Perpendicular - Tabs will be perpendicular to the beam
Parallel - Tabs will be parallel with the beam
F-Tab Direction
Perpendicular - Tabs will be perpendicular to the beam
Parallel - Tabs will be parallel with the beam
Tab Rotation - Rotates the two ends relative to each other. This allows you to create axis changers.
Check out my Configurable Bolt Knob to create knobs for this and other projects!
Examples
Here are just a few examples of possible configurations:
