1 / 5
Maisto 1/10 scale F1 RC Car wall mount — zdjęcie 1
1 / 5

Maisto 1/10 scale F1 RC Car wall mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom designed wall mount for the Maisto RC F1 cars in 1/10 scale. Stable, strong, low material use

Ocena
0 / 5
Polubienia
3
Pobrania
41
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Wall mount for the Maisto RC Formula one cars in 1/10 scale

Displays the model horizontally at a nice angle for showing off the car

Model has a reinforced hole for a standard #8 construction screw with an angle/wedge head

2 pegs fit the underbelly of the model screw holes, and shaped panels help provide stability

Just found out this might not work will all their models. I used the Ferrari when I designed it, but someone ran into an issue with a different model and the screw spacing/pegs.

Included is a gcode for the coreone, and 3mf project with reinforced (higher infill) areas around the screw hole, and the two support posts and their bedding. There is also an STL if you want to set infill yourself. 

I printed with reduced supports to ensure a nice clean finished look on all sides, however depending on your printer and overhang threshold you may need more supports than I would use.

Download, like and enjoy!

Tagi