NightOwl Filamentalist FV3 Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifications to mount the FV3 Filamentalist rewinders on the NightOwl
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This model adapts the FV3 Filamentalists to attach to the NightOwl. The FV3 mounts have been modified to match the aesthetics of the NightOwl, the NightOwl top plate has been modified to match the hole pattern of the FV3 mounts.
The mounts are attached using heatset inserts (3x4x5, Voron standard), and attached from below the top plate. This allows the rewinders to be assembled before mounting, and also hides the mounting hardware.
Note: the top wall of the mounts above the heatset insert is only 0.4mm thick. Be careful when installing the insert, and only use m3x6 screws to attach. I also recommend using forced 0.4mm extrusion widths using Classic (not Arachne) perimeter generation, to prevent surface artifacts around the mounting hole
STLs are oriented for proper printing, and options for either 608 or 688 bearings are given. Only need to print one or the other.
Only the modified parts are included here. Grab the rest of the files from the appropriate repos linked below.
Check out my other NightOwl mods:
BoxTurtle v1.1 Hub/Buffer combo: https://www.printables.com/model/1864558-boxturtle-v11-hub-for-nightowl
BarfTurtle LEDs: https://www.printables.com/model/1864612-nightowl-leds-for-lane-indication
Apex extruders (dual sensors): https://www.printables.com/model/1865211-dual-sensor-apex-extruders-for-nightowl
Smol v2 (HGX 2.0) extruders (dual sensors): https://www.printables.com/model/1865219-dual-sensor-smol-v2-hgx20-extruders-for-nightowl