Liczymy pasujące modele…
The file 2020_Mnt_Center_Spacer_[option].stl that comes with Filamentalist V3 allows it to be mounted to a 2020 extrusion, but if that extrusion is sitting on a table or the top of a printer, it is so short that the large drive wheels of…
Printed with 4 Perimeters, 15% Adaptive Cubic infill with PETG. Paint supports on the hole ceiling, change Support Options “top contact z distance” to .25 and “Pattern Spacing” to 3mm for easy to remove support.
This model adapts the FV3 Filamentalists to attach to the NightOwl. The FV3 mounts have been modified to match the aesthetics of the NightOwl, the NightOwl top plate has been modified to match the hole pattern of the FV3 mounts. The…
The Reprak Mount that comes with the filamentalist sits too high, so I designed a mounting mechanism that works with a 2020 extrusion mounting option BOM Print 2x of the extrusion mount 2x M3x6 screws (M3x8 works fine if you do not mind…
Implemented fastening of the front wheels to the printed axle like the rear ones in the original version The design of 2020 Rear Spacer has been changed to add the standart ERCF tag number plate.
This model is used as a base/feet for the FV3 Rewinder ( https://github.com/Carrot-collective/Filamentalist_Rewinder/tree/main/Filamentalist_FV3_Rewinder ) inside Sunlu S4 filament dryer. ====== Update 2026/03/25 ====== Based on the above…
I found that some of my spools would creep over the outer edge of my set up so I increased the outer retainer by 1mm edge
I'm about to start upgrading my ERCF V2 to the V3 and I wanted to use the filamentalist instead of the Cotton tail buffer this time. I remixed Matt's model for use with the FV3 2020 mount option. I used a 715mm long 2020 extrusion with…
I wanted to add filamentalist to my 3MS MMU system, and I wanted to more cleanly integrate the extruders into the system. This uses the rear mount and rear orientation of the filamentalist FV3 to mount a BMG and stepper. This was inspired…
When I replaced my ERCF v3 MMU with the BoxTurtle, I realised the BoxTurtle was missing an encoder, which gives excellent clog detection and enables me to intervene and save a print when I get a toolhead clog. Without the encoder the…
I wanted to add filamentalist to my 3MS MMU system, and I wanted to more cleanly integrate the extruders into the system. This uses the rear mount and rear orientation of the filamentalist FV3 to mount a BMG and stepper. This was inspired…
