1 / 1
Dreame X50 Ultra waste water adapter – 10 mm tube to 17 mm dishwasher fitting — zdjęcie 1

Dreame X50 Ultra waste water adapter – 10 mm tube to 17 mm dishwasher fitting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU adapter for Dreame X50 Ultra waste water add-on, fitting a 10 mm tube to a 17 mm dishwasher outlet.

Ocena
0 / 5
Polubienia
8
Pobrania
21
Wydruki
1
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

This adapter was originally created for a Dreame X50 Ultra waste water add-on to connect a 10 mm waste water tube to a 17 mm dishwasher waste water fitting.

Printed in TPU 95HF, the flexible material allows for a snug, leak-resistant fit without cracking and makes installation easier compared to rigid plastics. The flexibility also helps compensate for small tolerances in hoses and fittings.

Features

  • Designed for Dreame X50 Ultra waste water add-on

  • Adapts 10 mm hose → 17 mm dishwasher fitting

  • Flexible, tight fit when printed in TPU

  • Compact and simple design

Printing Notes

  • Material: TPU (recommended)

  • Layer height: 0.2 mm

  • Infill: 15–25%

  • Perimeters: 3–4

  • Print slow for best layer adhesion

Installation

Push-fit connection on both sides. Hose clamps can be used if desired, but may not be necessary due to the flexibility of TPU.

Disclaimer

Not intended for pressurized systems. Please verify dimensions before printing.

Tagi