Liczymy pasujące modele…
These are lego compatible bricks. The models here are only a selection for convenience. All x*y sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that with the…
These are lego compatible brick plates. The models here are only a selection for convenience. All x*y sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that with…
Block: Preferably 40% infill, though 10% is sufficient. Wedge: 10% infill. Bolt: 10%–25% infill. PLA will work, but PETG is recommended as it provides more flexibility in the bolt for tightening. Added Second Options on the Tightening…
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
Wall mount for a TP-Link Deco X50 node/4g-router and 5G router. The router model is for a X50 5G router which is oval and tapered upwards, not round. It isn't as snug as the node bracket, but when hooked up to the cables it wont move. If…
Pinted with PLA+ at 0,20. 2 walls and only 5% infill makes it strong enough.
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Collection of screws (ISO 4017 / DIN 933) including : M6x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
1st layer test by 0.2 layer height
These are lego compatible flat pieces. The models here are only a selection for convenience. All x*y sizes can be configured on the Perfect Printable Bricks website . If these don't fit quite right with your legos you can fix that with…
This is a remix . Its based on https://www.thingiverse.com/thing:757884/files. Its 50x50x50 (and not 80x80x80 as the original). I have cut a couple of milimeters on the base of the original model in order to increase the surface touching…
Hotwheels x IKEA x 3D printer This is a remix of @JasonBoi_937540 Hotwheels Sannahed display stand. Print 9x to fit in the Sannahed 50x50 display. Will fit 90 cars tightly in each slot. For the black background, I used black foam board…
Electrical Junction Box 80x110x50
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
First layer 150x150 0.2H First layer 150x180 0.2H First layer 50x50 0.2H
Designed this big round straw/hay bale for the kids of a friend so they can fill their play barn. Printed with: NO brim and NO support fuzzy skin on contour and hole for a more natural realistic look a golden and a mustard yellow PLA…
Simple square to adjust the Live-Z setting for the first layer. Notice: Slice with 0,2mm resolution; only one single layer should be printed! Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0,2mm…
Update 24/12/2022: Bottom exhaust uploaded was incorrect and didn't include the bottom L shape cut-out. This has been corrected in the latest version (v2). Description / Changes A modified version of RISCie's BentoBox 5015x2 Fan blower…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
I always struggle to get the bed leveled on my Ender 5 s1. I print this model to help me adjust the z offset. I then print my other model, First layer calibration 200x200 four corners Ender 5 s1, and manually adjust each corner until they…
Customized version of https://www.thingiverse.com/thing:82533 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=82533 Print instructions Category: 3D Printing Tests Instructions Using the following…
Collection of screws (ISO 4762 / DIN 912) including : M8x 8, 12, 16, 20, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE) (for a board with 2x2 inch / 50mmx50mm fieldsize) Chess #Dubrovnik #Staunton //////////////////////////////////////////////////////////////////////////////// The set - except of…
A fast printing vase mode desiccant container 50x50mm to fit inside of the spool center during storage. Less than 10 grams filament is needed and prints fast. Recommended to be printed with PETG (without partcooling) for strength and…
Caixa Organizadora 3D Baixe e imprima este arquivo para criar sua própria caixa organizadora personalizada! Ideal para armazenar pequenos objetos, esta caixa é prática e fácil de montar. Perfeita para organizar seu escritório, quarto, ou…
Test cubes 20x20x20, 30x30x30, 40x40x40, 50x50x50.
This is simple desktop card notes box up to 80x80x50mm inside. Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders. You can easy print it without…
Es ist eine einfache, kleine Kiste.
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
A plain quick printable stand for a TP-Link Deco X50 mesh router. It's printable without any supports and default settings. I wanted one since it has a handle below where it sits.
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
Customized version of https://www.thingiverse.com/thing:2187167 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167 Instructions Using the following options: enable_male_leaf = 1 enable_female_leaf =…
Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…
50X50X50mm Box with hinge and lock clip Print in place V2 Has fillets for a cleaner look and feel but can bit a bit tricker to print
I needed a larger bezel for my car as it has two single DIN frames (rather than a double DIN). I made this with a larger bottom edge to hide the gap, it fits snugly around the AX1000, AX3000/AX3200 and AX5000 screen. I curved it to match…
Custom Print Head for Vyper Printhead V1 and V3 In mid-December 2021 I had the idea of redesigning the printhead on my Vyper! My goal was to keep the build size of the original printhead, despite the 5015 fans. The width has remained the…
Collection of set screws (ISO 4028 / DIN 916) including : M6x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite…
Inside you can find dedicated case for Arduino Uno R3 + CNC shield Case have dedicated slot to connect cabels - easy to modify for your needs. On Top you have dedicated slot to connect FAN 60x60 hols for assembly 50x50 In cover also…
An adapter to use a Noctua 60mm fan on a CPU cooler that only accepts 50mm fans. Specifically designed for home lab server from Supermicro - SYS-5028D-TN4T. Should fit almost any cooler for the FCBGA 1667 socket (Intel® Xeon® processor…
This clamp will be used for Yamaha drum pad. You need 3 x M6 x 40mm LG, Socket head cap screw (SHCS) and 3 x M6 Hex nut. Material : PETG, Filament.. with 20% infill and with no support.
100x100x50 mm / 4mm dick, gedruckt mit 0,2mm Schichthöhe / 4 Wänden / 25% Füllung
Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…
After my child lost the back of our remote I finally decided to remake it… This was designed in Onshape and have included the step file for anyone who wants to use it as a template for a case with an airtag or something… Supports will be…
You need to print 2 pieces in order to mount it to the DIN rail clip. I have printed it out of PETG. Screws are ⌀2mm. I like to use it with this DIN rail clip (bit modified version is included in the list):…
Außen 50x50 Lochmuster 30x30
Einfacher Winkel siehe Bilder. Simple angle see pictures.
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
This is a silica gel box which 60x50x20mm
simple cable box 160x160x50 for M3 heat set threaded inserts
This 50x50 filler cover fits on the Balconera Series (50 or 80). You get two files: the one with the hole and one without any hole. Please note: despite all Lechuza filler covers look the same on the Lechuza site, they have different…
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
This is my first attempt at a 3D model using TinkerCAD. This was an attempt at making a mud guard for our MX500 dirt bike. Mud guard is affixed to the bike with two zip ties. I used automatic tree supports generated by OrcaSlicer to…
Electrical Junction BOX 80x80x50mm
Der Würfel dient zum Kalibrieren ohne Boden, mit Kanten und Kurven.
Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…
Escuadra de 50x50x30 con cartela de refuerzo Print Settings Printer Brand: RepRap Printer: BQ Hephestos Category: Other
angle grinder holder for pegboard with 50x50mm raster and 8x15mm holes To tighten the pin, you need a 3x18mm woodscrew. For the older Makita anglegrinder you have to print the legacy version, for the new one you have to print the 30mm…
Einfacher Winkel, die Maße findet ihr in der Zeichnung. Simple angle, you can find the dimensions in the drawing.
UPDATE: Am Übergang zum oberen Rand hatte sich ein kleiner Fehler eingeschlichen. Nun ist die korrekte Datei als trichter_rund_reckig_repaired.stl hinterlegt. Ein kleiner Trichter, zum Einfüllen von z.B. Vogelfutter in den Einfüllkamin…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Ever had a model that you wanted a rectangular base for? We made these to fit our minis that needed some longer bases. In particular Wolves, Horses, Boars and Sheep. There are 4 variations depending on the biome your character might find…
lego plate 30x50 studs
my local hardware store had only one piece of device mounting frame left in stock, I needed some more, so I constructed one by myself also included a self designed stiffener/connector for the cable duct (picture is showing the first try,…
Sony TV remove holder. Grey holder in photos is for the RMF-TX310U. Black holder on the right is for the RMF-TX500U. There are similar versions of these remotes with different numbers that may be compatible with one of these holders.
Este gabinete de 100x50x50 mm ha sido diseñado específicamente para proyectos electrónicos que requieran una carcasa compacta, funcional y fácil de imprimir. El modelo está optimizado para impresión sin soportes al colocarlo con la base…
Wall Mount for the Deco X50 AX3000 It's for the round 110mm normal router, not the oval 4G
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Use original printing instructions 14-03-2024: fixed hole spacing, was 23mm, changed to correct 23.5mm
Adjustable feet with a 50x50 mm flange. Hight: 40-60 mm. If these feet dont fit, just use Fusion 360 to edit them (download the .f3d parts). A printingspeed of 25 mm/s for the inner and outer shells in the threaded sections worked well on…
Description Hi I designend an wall mount for the TP-Link Deco X50 Mesh WiFi Router . It allows for a space-saving and secure mounting. This is my first design, so feedback is highly appreciated! Print Settings: Material: PLA / PETG Layer…
I had my Creality CR 10S5 printer in mostly original state for 2 years. I was printing with it, but I have some prusa printers mk3s and after some experiences I could see so many problems with those Creality printer. I decided to do not…
Kann ohne Unterstützung gedruckt werden. // Can be printed without support. Verwende mindestens PETG um es im Geschirrspüler zu reinigen. // Use at least PETG to clean it in the dishwasher.
This mount slips over the PSU that comes with the Deco X50 and holds the Deco X50 upright in a standard EU power socket. The part consists of three components: The PSU sleeve which has a pin which slots into the EU socket to prevent…
Der Griff kann mit 2 4x50 Spax Schrauben befestigt werden.
Designed this because I needed to hide some cables in my lab. Very sturdy design and will fit on a 220x220 bed printer.
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
This is a fan duct for part cooling for all current Artillery Genius and Sidewinder 3d printers (It hasn't been tested with the original Genius or Sidewinder x1 but may work) It uses two 5015 24v radial fans wired up in parallel It should…
This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm. ! Some of the print files are up to 225mm in size. They require a correspondingly large print bed. On the other hand, you have to divide…
Honda MTX50 year 1983 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
A small sign for a label to put a name for a plant Label dimensions 50x30mm Please leave a like if you like it and a post your make for Prusameters ;)
Rutx11 Mini Rack I designed a mini rack support for the Teltonika RUTX50. To fit correctly in the mini rack, I designed it to be 2U with a cable outlet. It is printed in PETG, 0.25 Draft, vertical with organic support. It can be printed…
Add walls for cards 90x50mm
This is a u-bolt pole mounting saddle for this U-bolt set: https://www.amazon.ca/uxcell-Round-U-Bolt-Length-Washer/dp/B093SR345L https://www.amazon.com/uxcell-Round-U-Bolt-Length-Washer/dp/B093SR345L Made to enhance the Carlon Meshtastic…
E-step calibration 100x100x50 Calibration for x y z Axis 100x100x50 Printer : Flsun V400 layer height : 0,2 line width : 0,4 no support ; infill 20% ; print time ~ 1 h Sunlu PLA Silk Gold MakerWorld : https://makerworld.com/en/@sweb3791…
I remixed the design from BeardedSwede to be able to fit when using upgraded dual 5015 cooling. It just uses a short piece of ptfe tube to feed the filament nicely centered into the extruder. For mounting you need 1x M3x16 and 1x M3x20…
Ipad holder for Yamaha DTX500 drum kit. I created this part in addition to the Drum mount on the Yamaha DTX500. Print with 20% infill with no support Material : PETG, PLA .. Hardware: 3 x Socket head cap screw M6 x 40mm or 50mm LG and 3 x…
This stand was designed to hold the classic 110mm diameter tp-link deco mesh systems series (x10/20/50/55/60) Printed with 3 walls and 20% infill.
A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 50 x 50 holes.
adapted the size to fit a 43x50mm powerstrip
This is a mount for 8 channels (137mm x 50mm) relay (holes at 44.7mm x 131.5mm). Supposed to be used with 2 clips from https://www.printables.com/fr/model/303480-din-rail-raspberry-pi-34-holder M2x16mm screws required. Printed with…
The mount for my X500 went off to the scrapyard with my car after a crash but the camera was fine. Replacement parts for this old camera are hard to find so I made one myself, based on my memory of the original, and printed it in PETG.…
I made a model of the TPA3116 2x50W and 1x100W Audio Amplifier because there are no 3d models of this amplifier and i wanted to design a case for it before I had orderd it. NOTE: THIS MODEL IS NOT ON POINT ACCURATE! Link to buy the…
In case the stems of the original side emblem are snapped, here is a replacement file for you! Just print it and glue it with double sided tape. You can also paint it like the original. In my case one of the two pins snapped and there…
Previous years I used permanent marker to make labels directly on pots, but by the time I needed to transplant the seedlings into open ground the labels were washed away or burned out by the sun and I couldn't read them! So this time I…
This model is used to help drive in a Subaru CV Axle Seal (35x50x9mm). Be careful not to drive the seal in too far!
I have designed a cover for the lens of the Meopta Optica6 3-18x50 since there is no reasonable version for sale. This is printed in PLA with a layer height of 0.16mm. The hole for the retaining bolt has 3mm. Support only at the bottom…
This is a remix to fit SF 3x5015 Neptune 4 fan mod shroud. Should be printed with PETG, ABS, ASA for durability and heat resistance.
This is a mount for the TP-Link Outdoor Wi-Fi Mesh (X50) to mount on siding to allow a plumb mount. The side with the “UP” indicator should face away from the wall. The mount that comes with the Deco fits on top and the holes align. Screw…
![Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]](https://media.printables.com/media/prints/214978/images/1965082_cc5a580a-e284-46ab-90c4-bd1b3406c6e9/2022-05-27-20_52_51-window.jpg)
