IKEA PAX50 Gridfinity Inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 105
- Wydruki
- 3
- Wyświetlenia
- 867
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm.
! Some of the print files are up to 225mm in size. They require a correspondingly large print bed. On the other hand, you have to divide the print parts manually in order to be able to print them. !
Here is the link to the drawer:
https://www.ikea.com/de/de/p/komplement-schublade-weiss-10246308/#content
! IMPORTANT !
My grid has a tolerance of 0.5mm. Only boxes/bins with the same tolerance will fit. 
I used a numbering system to label them and put them in the drawer correctly.
Starting with the back
10 = row 1
20 = row 2
30 = row 3
Part 31, for example, must be placed in the drawer on the front right.
Check also the pdf to see these numbers. I put them also on each model.
Give me some feedback if you try it out.
Thanks
Marco