Liczymy pasujące modele…
Information: As IKEA do no longer sell the plastic box and its accessories for their PAX-series, the only option was to solve it with 3D printing. For more information about the plastic box: https://en.ikea-club.org/item/s19808460.html…
Wydruk około 9,75 €–11,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have designed a new end piece for the IKEA Komplement wardrobe rod (old type) with an oval cross-section. After printing, just slide the rod into the part (it cliks into place with a mechanical lock. The rod hanger is attached to the…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
The attachments of your IKEA PAX KOMPLEMENT bar broke? No problem, this is your replacement. The original screws fit. You have to place the attachment on both sides of the bar before you mount them (with the original attachment, you slide…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since the original mounting mechanism is quite poorly designed and breaks easily when disassembling, I designed a more robust one. It does not rely on clips and makes gravity do the job of keeping your rail in position :)
Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing
Here is a remplacement for the Komplement clothes rail. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
This is a quick clip that partially snaps in place but can also be easily slid along for a tag system that requires no support, is partially angled for easier reading, and is designed to work with the Komplement Mesh Basket products.…
This is a replacement model for IKEA's KOMPLEMENT coat hanger rail mount, piece code 21590.
Brackets are fixed to the drawer front and back with 10mm 6g countersunk woodscrews and a suitably sized 6mm threaded rod (print brackets have 6mm thread designed in). The threaded hole is offset to allow it closer to the drawer bottom to…
I used this baseplate for my Gridfinity with the size of 5x10 for my 25cm trays and 9x10 for my 40cm tray, but any other should be fine as well! My fitter was printed with ASA and therefore warped. With PLA you may achieve different…
This is a stylish divider for the Ikea Komplement drawers for those that want to create additional compartements. Takes about 6-8hs and 250g to print. Can be Printed in Multicolor or Singlecolor. Min. Bed Size is 256x256. (X1C or…
I needed to mount a shelf underneath a fixed in place built wardrob. This bracket vill give you about 25mm (1") space between shelf above. Use 4x30mm screw to mount it. You need to print 4 mounting brackets.
Fragrance sample holder for original plastic Ikea Pax Komplement dividers. I'm not sure if it fits the new felt dividers, but it should be easy to remix. It clips under walls so it doesn't move. Fits 14 samples.
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
A cover for the IKEA 150° hinge to protect your clothing from the moving parts of the hinge. Print orientation: default from stl (same as in photo) Supports: yes (organic, needed only on the flat parts) Material: PLA
Ikea KOMPLEMENT Meshbasket Label Just add text in slicer. Clicks in place.
A clip for labeling Ikea Komplement boxes. Clips over the folded-over sides and holds labels that wouldn't stick to the felt. I printed these in Matt PLA but most materials should work. There's a normal profile which should print fine. If…
This sturdy, extended shelf allows you to stack two Komplement separators on top of each other. Unfortunately, only one Komplement separator fits in the IKEA PAX wardrobe because the standard shelf is too short. This sturdy, extended…
Useful space-saving boxes to keep your komplement drawer tidy. The models are divided into two groups A and B. Inside an Ikea Komplement drawer you can insert two lines for model A and one line for model B. For each model A and B there…
This is a model to convert a regular IKEA “Komplement” wardrobe rail into two shorter parts with a downward 90° angle. ##### The individual parts can be used as regular replacement parts as well ##### My girlfriend wanted to have a short…
9mm higher shelf so that 4 drawer and a basketdrawer under the hinge works. Not possible with orginal IKEA solution. Thanks Dan ( @Dan_3D_49659 ) for this solution. I made it only 9mm higher with cutting the model and extrude it.
When assembling the shelves inside a pax wardrobe I found the shelf holders a bit hard to press. So I made a simple tool to hold the holder in place and have more surface to press on to. I have attached the STEP file also for making your…
For better print results without support, I wanted to separate the dowel from the rest of the print when affixing stuff to my cabinets. This is basically just the dowel part of the Ikea shelf pin, which is inserted into the pre-drilled…
It's just a simple copy of the IKEA komplement shelf support/pin 139200. Print 100% for better strength. Please, give me feedback on this because I used only once and has been a while.
This piece will replace a panel mount for IKEA's PAX line of wardrobes. It is (was?) sold as part of a clothes hanger kit. The original screws seemed to be M6 and this is what this piece expecs. Print Settings Printer Brand: Prusa…
A cover for the IKEA 150° hinge to protect your clothing from the moving parts of the hinge. Print orientation: default from stl (same as in photo) Supports: yes (organic, needed only on the flat parts) Material: PLA
This remix (similarly to the original model) helps to put komplement shelves to levels where otherwise it would not be possible due to the hinges. I could not print the original model successfully with my printer, hence I created this…
❗❗❗ YOU CAN NOW USE INTERACTIVE ROW CONFIGURATOR! ❗❗❗ JUST CLICKY HERE! THE IDEA This holder system takes two clothes rails from IKEA Komplement series and turns them into filament spool rack. It's also expandable! WHY IKEA? I've seen a…
This is a replacement rear bracket for the ikea komplement basket drawers that are for the pax closet units. I printed it in ABS and attached it to the basket using M3x8mm screws, nuts and washers
Since Ikea seems to have changed the measurement of the inside of the full width Pax from 98,2cm to 96,2cm newer “Komplement” drawers won't fit in old Pax models without a 12mm spacer on each side. They will also work for the half wide…
Enclosed are the corresponding Fusion360 data files so that you can customize them for your needs.
Here are some mounts that I made to lock wooden boards on the Ikea Komplement for Pax, used on a Bror. I used PETG to make it stronger but any plastic could probably do it. It can be printed without supports. I made it for 10 mm wooden…
Spool holder for IKEA SKADIS pegboard (76x56 cm). Uses an IKEA KOMPLEMENT clothes rail (70cm). Suitable of spools of 1kg up to 3kg. Printed in PETG, but PLA should also work. I used thicker (5 layer) edges and 100% infil pegs, so they do…
This is a magnet label to better organize ikea pax/komplement basket contents. You can print the stl and write on it or modify the step file in order to print two colors on the first layer Holes are for 20x6x1.5mm magnets
Ikea KOMPLEMENT Meshbasket Label Just add text in slicer. Clicks in place.
The IKEA Komplement Bracket model is designed for supporting or connecting specific IKEA furnishing components securely. This model is intended for use as a replacement or upgrade part for IKEA Komplement systems, providing a sturdy and…
Modern Filament Spool Rack/Holder (Ikea Komplement) This filament spool rack is designed with a modern and sleek structure, providing not only storage but also a stylish addition to any 3D printing setup. The geometrical patterns on the…
Komplement drawer divider A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer. To print For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree…
Broken holders needed to be replaced by some sturdier. It ended with this design that has been loaded with clothes for years now and remains reliable
The bottom plate of your drawer sags because the back panel of the drawer was not stiff enough and the bottom plate slipped past the mounting groove? This stiffener might help you. Required additional parts: 1x Threaded rod M8 (I cut it…
This is a simple spacer for the IKEA “KOMPLEMENT” pull-out clothes rail (75 cm wide and 35 cm deep) for the new PAX 2.0 wardrobe system. The clothes rails developed for the new PAX 2.0 (my model is from 2025) are a step backward, in my…
This reinforced 3D-printed replacement for the IKEA KOMPLEMENT 21590 bracket is designed to improve durability and load-bearing performance compared to the original injection-molded part. Increased Wall Thickness - The original IKEA…
Use 4 pieces of M3x6 screws to attach the label holder through the mesh eyes. Start in the corner with rounded hole, continue with the slot holes. Better to use laminated paper or thick paper labels instead of common copy paper label.…
Replacement Komplement Shelf Pin/Bracket for PAX cabinets Print Settings Printer Brand: Creality Printer: Ender 6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .16 Infill: 15% Filament: Hatchbox PLA Notes: Printed on Ender…
Hi Makers, Few month ago I revamped my old Ikea Komplement pull-out pants hanger that was not in use anymore into a small part organizer. You will find a small handle and a box with separators in the 3mf file. I can, of course, adapt the…
I've created a nice Coat rack in the space between two walls with a Ikea Komplement rod. It turned out great and sturdy. You can find the hooks I designed also on Printables.
Just print as many hooks as you like to complete your coat rack with some hooks. Designed with a diameter of 25mm for exact fitting the Ikea Komplement rod. :) Enjoy
Print it with regular supports and laying on its side. The geomaetrie is simple enough to cut out the supports with a sharp nife without damage to the model.
I needed it to fit in to a larger hole and not the original pin for the shelf. Its 160% Larger and pin deletion.
230324 IKEA "Komplement" like bracket replacement or 2 way mount Still had a IKEA komplement cloth hanging rod lying around, one bracket was missing and I wanted to mount it vertical under a shelf. So I designed this horizontal and…
Drill hole marker for IKEA complement hinges. For 19mm thick wood! !!! WATCH OUT !!! IKEA has changed the orientation for the softclose hinges, so check which markings are required for the model you are using. use Place the door and body…
Model slouží pro rychlé zapamatování či ověření znalostí ohledně komplementarity bází v DNA/RNA.
It can be screwed in using IKEA's 100325 screws (or similar).
Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…
Ein Etui für 3 Armbänder Appel Watch 38 mm. Anmerkung: Das Bild entspricht nicht dem aktuellen 3D-Modell, aber um den Druck zu demonstrieren habe ich eine alte Version hochgeladen. Das Rendering entspricht den STL-Dateien. Maße: 100 x 195…
This model derived from the original IKEA KOMPLEMENT 12571 or 21590 clothes rail holder. It should be printed at least with PETG or stronger materials like Prusament ASA or PC Blend. The print should be done with 25% infill, random seam…
Hier eine sehr simple Konstruktion für die IKEA komplement Schmuckeinsatz mit 6 Fächern und mit 12 Fächern. 0,2mm wäre mein Empfehlung.
This is a drawer divider made for the 100cm x 35cm Ikea Pax Komplement mesh drawer (product code 902.572.94). Attaches to the drawer using zipties and can be placed in any position to achieve the desired compartment width.
Moving into a new apartment with your old Ikea shelves sometimes leads to reinforced shelf pins ;-) I am very happy with the result. It is really strong and works with the original screw. The thinkering with different print orientations…
I needed a clothes rail for an IKEA Pax wardrobe. So I created this remix to use an old broomstick as a rod. Suitable for a 15/16" (23.8 mm) broom handle. It works great and you can save 10€ :-) Cheers
this is heavily inspired by the IKEA Komplement holder, of which we have one. Printing a second one was much faster than going to IKEA and buying it. Screws into the existing 5mm/System 32 holes with the standard Euro-Screws ( I used…
Add-on for using IKEA KOMPLEMENT pull-out rails (602.632.44) under the desk, for example in the kitchen unit. If you want to use one basket (for example 002.573.02 ), you will need one of the front-left and one of the front-right and two…
Ikea Metod cupboards lack a low height drawer. There is one available in the Pax/Komplement series. However, the Pax standard width of 50cm does not fit the Metod's 60cm. Further, on the bottom of my cupboard, the door hinge got in the…
A clip for labeling Ikea Komplement boxes. Clips over the folded-over sides and holds labels that wouldn't stick to the felt. I printed these in Matt PLA but most materials should work. There's a normal profile which should print fine. If…
This drill guide helps to precisely drill the holes for door hinges
I use a lot of Bambu filaments and I left them in the box until I need them, so I was looking for a way of storing the original Bambu spool/refill boxes in a simple and cheap way. This allows you to store 21 boxes with just an IKEA…
This is a remix of the model, having boxes with more depths.
The 3D model "IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe Frames" is a detailed and accurately scaled replica of the original KOMPLEMENT shelf hook designed specifically for use in all IKEA PAX wardrobe frames. This model provides a…
Some spare part for the clothes rail Komplement from IKEA https://www.ikea.com/fr/fr/catalog/products/30256891/ Block the tube with a screw Ø8mm head Print Settings Printer: I3 MEGA Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 40…
![IKEA Komplement Filament Rack System [IKFRS] by Kefir](https://media.printables.com/media/prints/34f0025a-f81f-44fd-a204-db551075d38c/images/10381852_e53d1f29-10a4-4c76-8191-d75608061a31_74817c9f-1cc1-431e-852e-830509ed1442/system.png)
