IKEA compatible clothes hanger holder - Komplement/Pax - System 32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For attaching to the closed cabinet - two spots fo hanging clothes hangers e.g. for drying
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
this is heavily inspired by the IKEA Komplement holder, of which we have one. Printing a second one was much faster than going to IKEA and buying it.
Screws into the existing 5mm/System 32 holes with the standard Euro-Screws ( I used countersunk screws).
Just barely fits through the opening when the door is open 90°, and lightly clamps on the edge. My side panels are 18,2mm, it you have other thicknesses you can use the non-reinforced version, although that is rather flimsy.
Printed well in PLA with 4 perimeters, 0,6 nozzle