50cm and 100cm wide IKEA PAX Komplement drawer divider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A divider for 50 cm wide (40 cm inner dimension) or 58 cm deep PAX Komplement drawer
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 606
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Komplement drawer divider
A divider to divide 50 cm wide PAX Komplement drawers. The two pieces slot in place and are held together by the drawer.
To print
For a Prusa CORE One or similarly sized printarea place both pieces at a 45 degree angle on de printbed. Slightly overlap the pin and one of the prongs
I've printed mine on a CORE One with the following settings:
Material: PLA (other materials should work just as well)
Nozzle: 0.4 nozzle
0.2 mm SPEED profile
No supports or brim needed
The model is already 2 mm longer to account for (minimal) PLA shrinkage
Update
Added an optional extension to divide the drawer front to back. There are two options, with a pocket to place double sided tape and without. The tape isn't needed but can stabilize the divider.