IKEA Pax Komplement Wardrobe Rail Mod (or REPLACEMENT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification you can use to convert a regular "Komplement" wardrobe rail into a shorter 90° one.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This is a model to convert a regular IKEA “Komplement” wardrobe rail into two shorter parts with a downward 90° angle.
##### The individual parts can be used as regular replacement parts as well #####
My girlfriend wanted to have a short clothing rail in her cabinet to store her traditional blouses AND have leftover space for her shoes. I modeled two very beefy mounting brackets and a 90° elbow, cut an existing clothing rail (Ikea code 302.568.91) into two pieces and screwed everything to the side of the cabinet and the shelf below using the original and some wood screws.
Because the mounting bracket turned out to be way more solid than the original ones by IKEA, I replaced all of the original ones as well. Now you can almost do chin-ups inside the cabinets ;)
The two mounting parts print fine without supports, the elbow should be printed standing upright on the corner with the two openings pointing 45° upwards (away from the printbed) and with enough support or a brim for maximum strength. I may remodel this part if there's any need for it (mine works fine for over a year and heavy use).