Ikea old Pax Komplement drawer rail adapter spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer to allow you to mount narrower new Ikea Pax drawers to older pax models.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since Ikea seems to have changed the measurement of the inside of the full width Pax from 98,2cm to 96,2cm newer “Komplement” drawers won't fit in old Pax models without a 12mm spacer on each side.
They will also work for the half wide drawers.
These spacers are to be inserted at the screw point between the rails and the outer boards. For one drawer you will need one of each spacer (front left, front right, etc.). The STEP file gives you the exact amount for one drawer.
Since the rails are now spaced out you will also need longer screws than the included ones. M6x20 bolts or 6.5x20 wood screws with a blunt tip like the original ones will work. For normal pointy wood screws you will need 6.5x25 for proper thread engagement.