1 / 12
ExpressLRS EP1 Receiver Antenna mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of antenna mounts for the ExpressLRS 2.4 EP1 receiver from Happymodel
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is a collection of antenna mounts for the ExpressLRS 2.4 EP1 receiver from Happymodel that I designed to use in my TBS Source One frame, but I guess they work in any frame with 5mm diameter spacers.
There are three options:
- Rear Vert Short. For mounting the antenna vertically in the rear spacer (5mm diameter). This is useful when using a long wire antenna.
- Rear Vert Long. For mounting the antenna vertically in the rear spacer + a mount for the receiver. This is useful when using the short antenna provided by Happymodel. The receiver stays close to the spacer. It is a tight fit, and it seems that the receiver it's not going anywhere but take your precautions.
- Bottom Mount. For mounting the antenna in the bottom of an arm.
They were designed to be printed without supports. I printed them in TPU, 0.12 mm height to have more details in the holes and in the receiver case (long version).