Double-Sided Over-the-Door Hook | Fits 40 mm Doors (No Screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal double-sided door hook for hanging clothes on both sides of a door. Designed for 40 mm doors.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a minimal double-sided over-the-door hook designed to be used on both sides of a door at the same time.
The hook clips over the top edge of the door and provides a hanger on each side, making better use of otherwise wasted space. It’s ideal for shirts, jackets, towels, or light bags.
Designed specifically for 40 mm thick doors.
If your door is slightly thicker or thinner, scaling the model in your slicer will adjust the fit.
No screws.
No glue.
No door damage.
The simple geometry means:
fast printing
low material use
no supports
nothing to assemble
Perfect for bedrooms, bathrooms, rentals, or anywhere drilling holes would be a bad idea.
Printing Notes
No supports
Print orientation: on a side
Layer height: 0.2 mm
Infill: 20–30%
Material: PLA works
If you like my designs do not hesitate to visit my YT channel :) - @taboretum
If you find it useful feel free to buy me a coffee!