ELRS ES24TX Slim lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for the ELRS ES24TX Slim module
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't like the Ironman design that Happymodel put in the Xlite module for Expresslrs so I designed this simple lid to replace it. Due to the limitations of 3D printing and with the aim of making the model support free I didn't add the "lip" the original model has (see last picture), but it works good. I didn't add screw holes for the fan as I found out the fan fits well enough without the screws. I didn't include space A reasonably well calibrated printer for the blue leds that come with the kit as I am not going to use them anyway.
I included a version with more ventilation which I haven't printed but it should work just as the non-ventilated one.
A reasonably well calibrated printer wont have problems printing it without supports. I printed it in Silver PLA, which goes great with my transmitter, but I still need to test how much the module heats to know if PLA will resist.