1 / 4
TRMNL 7.5inch(OG) DIY Case with Magnets or Wallmount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for TRMNL 7.5inch(OG) DIY with with Magnets or Wallmount option
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 395
- Wydruki
- 2
- Wyświetlenia
- 1469
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (1)Kolekcje (42)Powiązane
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall.
Use 4 M3x6mm screws to put it together.
Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the connector does not sit on top of PCB. Otherwise it can bend your screen.
There are various versions depending if you only want the wallmount, magnets or both. There is also blank version in case any one wants to use different magnet size.