Alienware AW610M Mouse Holder for IKEA Skadis (3D Scanned Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom IKEA Skadis holder for Alienware AW610M. Designed via 3D scan for a perfect, snug fit. Requires supports.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 96
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom wall mount for the Alienware AW610M Gaming Mouse, designed specifically for the IKEA Skadis pegboard system.
Designed with 3D Scanning This model represents a new level of precision in my design process. I used a CR-Scan Ferret to create a 1:1 3D scan of the mouse body. Using this scan data, I reverse-engineered the holder to match the mouse's exact curvature. The result is a "natural," snug fit that cradles the mouse perfectly without scratching or forcing it.
Features
Contoured Fit: The cradle matches the complex geometry of the AW610M thanks to the 3D scanning process.
Skadis Native: Integrated hooks designed for standard IKEA Skadis boards.
Secure Storage: Keeps your gaming mouse safe, displayed, and off your desk when not in use.
Print Settings
Supports: Required. You must enable supports for the Skadis hooks on the back. Tree (organic) supports are recommended for easier removal.
Material: PLA, PLA+, or PETG.
Layer Height: 0.16mm or 0.20mm (lower layer heights will make the contoured curve feel smoother).
Infill: 15% Gyroid.
Orientation: Print upright (as it sits on the wall) to maintain the strength of the hooks.
Happy Printing!