Extension Cord Holder/Hook with 90 Degree Corner Bend Option
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooks for an extension cord (12-gauge, 3-conductor) and a channel for a 90-degree gradual bend in the cord
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The cord hook design accommodates a heavy duty, 12 AWG / 3 conductor, extension cord with a maximum diameter of 15mm.
The corner hook design allows the extension cord to be gently bent around a 90-degree corner. This allows the cord to drop down from a joist without a sharp bend.
Both of these models can be mounted using drywall screws. The cord hook uses a #6 x 1" screws, and the corner hook uses #6 x 1-5/8" screws.
These models were printed with PETG and without support material. The parametric FreeCAD model is provided which contains both parts.