Wall Mountable Compact 7 Hook Key Hanger

I have a decorative key hook in my kitchen that was getting overloaded with random keys that I don't use often, and I did not have room for my car keys.  To fix this, I designed this simple key holder that I could mount in my laundry room to store these keys and keep them out of my way when I am not using them.  I designed the holder to be more compact with offset hooks so that keys hanging on the top row will not interfere with keys hanging on the bottom row.  The hooks are thick enough that they will not break easily but this means that you will need to have a ring on most, if not all of your keys for them to fit on the hooks. 

There are two mounting holes in the top corners that are 0.177 inches in diameter to accommodate #6 wood screws.

I printed my key holder with some basic PETG and 35% Adaptive Cubic infill for added durability.  While the design does have some extra support built into the bottom of the hook to increase the strength of the hooks, you may want to use a higher infill percentage if you are going to have a lot of weight on the hooks.  You will need supports for the hooks, so I recommend printing the holder standing up.  I was initially going to print it flat, but I was not able to get the tree supports to reach the bottom row of hooks in that orientation.

Please note that I did design the key holder to be mounted flat on the wall despite what my picture shows.  I have a 2x4 under the cabinets in my laundry room for mounting things without needing wall anchors and because of this, I do not have it mounted flush to the wall.