Shower/tub valve backer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use to support shower/tub valve
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
My shower mixing valve was clamped to the shower liner using a plastic disc. During removal of a leaking mixing valve I found the plastic backer disc was stripped out and now needed to remove the disc, otherwise the valve was just floating behind the wall. Quick fix to save removing the shower liner or cutting into the wall.
Designed this to be installed through the shower liner hole with the removable wings. Uses all metal fastening by gluing in #10 nuts which is close to M6 (10mm flat to flat) but you might need to open the holes up with hole compensation for metric fasteners. Hope this helps someone!
Recommend PETG or ASA due to heat from the valve.