Small VESA Mount for Modular Mounting System (75mm & 100mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount devices with 75mm or 100mm VESA pattern using Modular Mounting System components.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This mount allows you to mount devices with 75mm or 100mm VESA pattern using Modular Mounting System components.
NOTE: This is only a 3d printed part and not intended to hold heavy displays. Make sure your application is reasonable before trusting a valuable piece of equipment to a few millimeters of plastic!
I did use this to hold a Surface Pro for a long time.
The mounting adapter is printed as a separate piece and inserted from the front before mounting the plate to your device.
Print both parts in the provided orientation for optimal layer strength.
I use M4 x 12mm hardware for my device.
And, like always, here's a link to the OnShape document in case you want to modify this for your own purposes.
Check out my Configurable Bolt Knob to create knobs for this and other projects!