FNIRSI 100W GaN (US) Charger EU Power Cord Adapter Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The enclosure for the FNIRSI 100W US Charger (Model JH-098 / CH100G)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom-designed enclosure for the FNIRSI 100W GaN Charger (Model JH-098 / CH100G). It is specifically designed to convert the US-plug version of the charger into a desktop power station by connecting a standard EU power cord internally.
The design features a secure strain relief clamp (saddle clamp) to ensure the power cable cannot be pulled out, making it safe for daily use on your workbench or desk.
Technical Features:
Designed for the 62x63x32mm charger body.
Uses a screw-down cable clamp (M4 screws) to secure the incoming power cord.
Airflow slots to manage heat during high-power 100W charging.
Front-facing cutout for the USB-C port, compatible with thicker cable connectors.
Printing Instructions:
Material: ABS or ASA is highly recommended due to the heat generated by the charger. Avoid PLA for long-term 100W use.
Infill: 25% (Gyroid recommended for better structural integrity).
Wall Count: 4-6 perimeters for strong screw threads.
Hardware needed: 4x M4 screws.
Assembly Note:
Before assembly, make sure the American pins are bent down. Connect the inner wires securely and insulate the joint well with heat shrink tubing or electrical tape and secure the cable with a clamp.