Coup Boardgame Insert, also fits Reformation expansion cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is actually a from-scratch design, but was inspired by the existing design by rrapnek. Since I have the…
- Ocena
- 4,8 / 5
- Polubienia
- 48
- Pobrania
- 354
- Wydruki
- 6
- Wyświetlenia
- 1864
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
This is actually a from-scratch design, but was inspired by the existing design by rrapnek.
Since I have the Resistance expansion (adds the Inquisitor), my cards are around 20mm thick, so the 15mm cavity on the original design wasn't deep enough.
--> This new design should work fine for those who have the Resistance expansion, or just the base game!
I also blocked the cards in on one side so you can take the insert out of the box and use it for easier dispensation during gameplay.
After that, I got a bit carried away and added some FANCY DECALS.
There is a normal version, and a version with the text 'DUKE BUCKS' emblazoned on the bottom of the coin tray, in case you like to bark that out obnoxiously while claiming to have a Duke card.
(everyone seems to inevitably /mysteriously have a Duke card for the first round of play...)
NOTE: The print in the pictures was a little bit snug in the box (especially since the insert is intended to be removed and utilized during gameplay), so I added better tolerances for the STLs that are posted here.
Category: Toy & Game Accessories