Coup Boardgame Insert, also fits Reformation expansion cards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is actually a from-scratch design, but was inspired by the existing design by rrapnek. Since I have the…
- Rating
- 4.8 / 5
- Likes
- 48
- Downloads
- 355
- Makes
- 6
- Views
- 1,868
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
This is actually a from-scratch design, but was inspired by the existing design by rrapnek.
Since I have the Resistance expansion (adds the Inquisitor), my cards are around 20mm thick, so the 15mm cavity on the original design wasn't deep enough.
--> This new design should work fine for those who have the Resistance expansion, or just the base game!
I also blocked the cards in on one side so you can take the insert out of the box and use it for easier dispensation during gameplay.
After that, I got a bit carried away and added some FANCY DECALS.
There is a normal version, and a version with the text 'DUKE BUCKS' emblazoned on the bottom of the coin tray, in case you like to bark that out obnoxiously while claiming to have a Duke card.
(everyone seems to inevitably /mysteriously have a Duke card for the first round of play...)
NOTE: The print in the pictures was a little bit snug in the box (especially since the insert is intended to be removed and utilized during gameplay), so I added better tolerances for the STLs that are posted here.
Category: Toy & Game Accessories