1 / 2
VORON 2.4 Rear Umbilical PUG and XY Endstop Cable Duct — zdjęcie 1
1 / 2

VORON 2.4 Rear Umbilical PUG and XY Endstop Cable Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows for a combination of umbilical and the combined XY endstop PCB.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
277
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: This setup works but is not ideal. You should probably remove the Y drag chain altogether. I recommend checking out my final solution:



If you can't do that right away, then this part will work and fit nicely.

Print using the recommended Voron settings: Sourcing Information | Print Settings

Tagi