1 / 9
Solder Fingers 2.0 - soldering aid / helping hand — zdjęcie 1
1 / 9

Solder Fingers 2.0 - soldering aid / helping hand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Soldering aid to hold wires using cheap clothespin springs.

Ocena
4,909 / 5
Polubienia
230
Pobrania
819
Wydruki
28
Wyświetlenia
5569
Oceny
22

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A few years ago, I made my own version of a soldering aid for wires. I posted it on Thingiverse and it became fairly popular. I always wanted to redo it with spring loaded clips. Using the springs from dollar store clothespins, I designed and printed tests until I came up with this.

Best printed with 3 or more walls/outlines, and 30% or more infill. Needs good layer adhesion for strength.

Added a 7mm version for thicker springs that @David used. The cheap dollar store clothespin springs I used were 5.5mm diameter. Use "_5mm" files for 5.5mm springs. Use "_7mm" files for thicker 7mm springs. 

Added horizontal “_horz” and vertical “_vert” teeth variants of the design as well.

Tagi