Solder Fingers 2.0 - soldering aid / helping hand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soldering aid to hold wires using cheap clothespin springs.
- Rating
- 4.909 / 5
- Likes
- 230
- Downloads
- 819
- Makes
- 28
- Views
- 5,569
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A few years ago, I made my own version of a soldering aid for wires. I posted it on Thingiverse and it became fairly popular. I always wanted to redo it with spring loaded clips. Using the springs from dollar store clothespins, I designed and printed tests until I came up with this.
Best printed with 3 or more walls/outlines, and 30% or more infill. Needs good layer adhesion for strength.
Added a 7mm version for thicker springs that @David used. The cheap dollar store clothespin springs I used were 5.5mm diameter. Use "_5mm" files for 5.5mm springs. Use "_7mm" files for thicker 7mm springs.
Added horizontal “_horz” and vertical “_vert” teeth variants of the design as well.