1 / 5
1"  Square Aluminum Extrusion Corner (No Supports) — zdjęcie 1
1 / 5

1" Square Aluminum Extrusion Corner (No Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is corner adaptor for building a printer enclosure using 1" aluminum extrusion. It should be printed on its…

Ocena
5 / 5
Polubienia
48
Pobrania
159
Wydruki
2
Wyświetlenia
723
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is corner adaptor for building a printer enclosure using 1" aluminum extrusion. It should be printed on its flattened corner so that all three legs are of equal strength and no supports are necessary. There is an integrated pillar support on the inside that adds a bit of strength and allows it to be supportless.

The wall thickness is 3mm for strength, and it should also allow scaling for different extrusion sizes.

I have also added a couple of T joints as requested. I haven't personally tested them yet.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Filament: Overature PETG

 

 

Category: Hobby

Tagi