Ostmann & Fuchs - modular spice rack/shelf system | Gewürzhalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular spice rack system for Ostmann (Ø44mm) & Fuchs (Ø56mm) jars. Screw mount, no supports needed.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 694
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Summary
Keep your kitchen organized with this modular spice rack system. Designed specifically for common spice jar standards (Ostmann & Fuchs), these holders can be mounted on cabinet doors or walls. The modular design allows you to mix and match sizes to perfectly fit your available space.
📏 Compatibility & Dimensions
There are two main versions available based on the jar diameter. Please measure your spice jars before printing.
Type A: Fits "Ostmann" (Standard)
Designed for jars with a diameter of up to 44 mm.
Total Height: 40 mm
Total Depth: 48 mm
Variant | Capacity | Total Width |
1x | 1 Jar | 48 mm |
2x | 2 Jars | 95 mm |
3x | 3 Jars | 143 mm |
4x | 4 Jars | 188 mm |
5x | 5 Jars | 235 mm |
Type B: Fits "Fuchs" (New & Old Style)
Designed for jars with a diameter of up to 56 mm.
Total Height: 40 mm
Total Depth: 60 mm
Variant | Capacity | Total Width |
1x | 1 Jar | 60 mm |
2x | 2 Jars | 118 mm |
3x | 3 Jars | 177 mm |
4x | 4 Jars | 235 mm |
5x | 5 Jars | 295 mm |
🖨 Print Instructions
This model is optimized for easy printing without post-processing.
Material: PLA is sufficient; PETG recommended for kitchen durability.
Supports: NO supports needed.
Orientation: Print flat on the back face (as oriented in the STL).
Infill: 15-20% (Grid or Gyroid) is plenty strong.
Perimeters: 2-3 walls.
🛠 Assembly & Installation
The system is designed to be modular. You can mount multiple rails side-by-side to cover the full width of your cupboard door.
Mounting: Use flat-head screws.
Recommended Screw Size: 3.0 x 12 mm
Tip: Pre-drill pilot holes if mounting into hardwood or delicate cabinet doors.