Dewalt DCW600 4" baseplate and rebate fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DCW600 baseplate and rebate fence ideal or use in cutting door hinge rebates as well as edge profiles
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I needed to fit a large number of door hinges so designed an adjustable jig (link at end of text) that needed a depth controlled router fence/baseplate. None of the baseplates I could find suited my needs hence this model design. It is as compact as I could realistically make it, so as the reduce the size of the door frame jig I intended to use it with.
I have included two designs of 20mm diameter knob. Both can be printed to take either a captive M6 nut or an M6 threaded insert. I kept the knobs small so that they can be used even with the fence closed up. The only other items needed are 2 x 35mm M6 bolts and 2 M6 washers.
I printed this in 3DQF 'Default Yellow' PETG at 0.2mm layer height, 3 walls and 15% infill
The front handle shown in my photo is not included in these STL files as I had already downloaded and printed that as a component from another DCW600 jig - the Trimming jig designed by KajasX, printables model 168259. However, any handle that takes an M6 bolt can be used, but the one by KajasX that has a solid metal core is well balanced. Photo and link to that model........
Link to my Adjustable door hinge jig:
https://www.printables.com/model/1579305-adjustable-door-hinge-jig-for-50mm-2-to-102mm-4-hi
