Dewalt DCW600 4" baseplate and rebate fence
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DCW600 baseplate and rebate fence ideal or use in cutting door hinge rebates as well as edge profiles
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I needed to fit a large number of door hinges so designed an adjustable jig (link at end of text) that needed a depth controlled router fence/baseplate. None of the baseplates I could find suited my needs hence this model design. It is as compact as I could realistically make it, so as the reduce the size of the door frame jig I intended to use it with.
I have included two designs of 20mm diameter knob. Both can be printed to take either a captive M6 nut or an M6 threaded insert. I kept the knobs small so that they can be used even with the fence closed up. The only other items needed are 2 x 35mm M6 bolts and 2 M6 washers.
I printed this in 3DQF 'Default Yellow' PETG at 0.2mm layer height, 3 walls and 15% infill
The front handle shown in my photo is not included in these STL files as I had already downloaded and printed that as a component from another DCW600 jig - the Trimming jig designed by KajasX, printables model 168259. However, any handle that takes an M6 bolt can be used, but the one by KajasX that has a solid metal core is well balanced. Photo and link to that model........
Link to my Adjustable door hinge jig:
https://www.printables.com/model/1579305-adjustable-door-hinge-jig-for-50mm-2-to-102mm-4-hi
